Answer
Aug 18, 2021 - 05:34 AM
The Threadlockers cure anaerobically, meaning that it only hardens where the adhesive has no contact with atmospheric oxygen. At the same time, the hardening speed continues to be influenced by the catalytic effect of metal and the gap width. Excessive adhesive that is pressed out of the gap between the two parts will not harden and can be removed with a dry cloth or a cloth saturated with acetone cleaner.
This product is Approved by German Technical and Scientific Association for Gas and Water (DVGW; reg. no. NG-5146BM0552), tested in accordance with DIN EN 751-1 (not permissible in domestic gas installations in Germany in accordance with DVGW TRGI 2008) NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water
Wurth Chemical products are professional use only it is up to the professional to decide if the Wurth product is correct for their application and method of application. Product testing is advised.
Thank you for your product question
Product Management
This product is Approved by German Technical and Scientific Association for Gas and Water (DVGW; reg. no. NG-5146BM0552), tested in accordance with DIN EN 751-1 (not permissible in domestic gas installations in Germany in accordance with DVGW TRGI 2008) NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water
Wurth Chemical products are professional use only it is up to the professional to decide if the Wurth product is correct for their application and method of application. Product testing is advised.
Thank you for your product question
Product Management
